A holiday should be about relaxing, not worrying about what is happening at home. A little preparation before you leave can cut the electricity your empty house wastes and make it a less attractive target for intruders. Lighting plays a part in both. Work through this checklist in the days before you go, and you can enjoy your time away with greater peace of mind.
Part 1: Cut wasted energy
Switch off standby devices
Televisions, set-top boxes, games consoles, routers you do not need, computers, printers, coffee machines and chargers can draw power continuously while on standby. Switch them off at the wall or unplug them. Over a week or two away, there is no reason to keep them powered.
Turn off the water heater
An electric water heater kept hot while nobody is using it wastes energy every day. Switch it off before you leave, or set its timer to come back on shortly before you return. If you have a solar water heater, check whether any electric backup element should be switched off.
Switch off air conditioning and heating
Make sure all air conditioning units are off, including any in rooms you rarely use. If you have pets staying at home or a pet sitter visiting, arrange suitable settings with them.
Manage the fridge and freezer
Use up perishable food before you go. For a short trip, leave the fridge running at its normal setting rather than switching it off, which can lead to odours and mould. For a long absence, you may prefer to empty, clean and switch off the fridge, leaving the door ajar.
Switch off non-essential circuits
Some households switch off circuits they do not need at the distribution board. Only do this if you know which circuits are safe to turn off, and never switch off circuits that power alarms, cameras, a fridge or freezer you are leaving on, or security lighting.
Part 2: Use lighting to protect your home
A home that is completely dark night after night, or with one light left burning continuously, can signal that nobody is in. Well-planned lighting makes your property less inviting to intruders and helps neighbours and passers-by notice anything unusual.
Put indoor lights on schedules
Smart switches or plug-in timers can turn lights on and off in the evening so the house looks occupied. Vary the times and rooms where possible, rather than repeating exactly the same pattern every night. With app-controlled smart switches such as iotty, you can check and change your lighting remotely while you are away.
Install motion-sensor floodlights
Outdoor LED floodlights with motion sensors switch on automatically when movement is detected, lighting up the area and drawing attention to anyone approaching. They are ideal for entrances, side passages, corners, driveways, garages, yards and gardens, and because they only come on when needed, their running costs are low. Aim them carefully so they do not dazzle neighbours or passing drivers.
Use dusk-to-dawn wall lights
Outdoor wall lights at the front door, garage and patio provide a steady level of light through the night when fitted with a dusk-to-dawn photocell. Many people combine a low background level from wall lights with motion-sensor floodlights for brighter light when needed. Modern LED lanterns and wall lights come in traditional and contemporary styles, so they can also add to your home’s appearance.
Light porches and covered areas
On covered porches and terraces, recessed downlights or soffit fittings provide clean overhead light that blends into the ceiling while eliminating dark corners near doors and windows. Read more in our introduction to soffit lights.
Consider solar lights for paths and gardens
Solar path lights, spotlights and motion-sensor lights need no wiring, so they are easy to add along walkways, garden borders and fences. Many include a built-in light sensor so they only activate after dark. They work best in positions that receive plenty of direct sun during the day, which is rarely a problem in Malta’s summer.
Check your outdoor fittings
Before you go, test sensors and timers, replace any failed lamps, clean dusty lenses and solar panels, and make sure fittings are suitable for outdoor use. Look for an IP65 rating or above for fittings exposed to rain and dust.
Part 3: Final checks before you leave
- Close and lock all windows, doors and shutters.
- Ask a trusted neighbour or friend to keep an eye on the house and clear post or deliveries.
- Avoid announcing your trip on social media until you are back.
- Test your alarm system, if you have one.
- Confirm outdoor and indoor lighting schedules are set.
- Make a note of what you switched off so it is easy to restore on your return.
Enjoy your time away
A few simple steps can save energy while you are away and give your home a lived-in look every evening. The LTC LED Lighting showroom on St Paul Street, Naxxar, has a wide range of outdoor and security lighting, both mains-powered and solar, as well as smart switches, and our staff will help you choose the right fittings for your home. Get in touch with us for advice.






