Specialists for Commercial, Industrial & Residential Projects

4 LED Strip Light Decoration Ideas

LED strip lights are one of the most versatile lighting products available. They are thin, flexible, low in energy use and can be cut to length, so they fit into places no conventional fitting could reach. They come in a range of whites and colours, including RGB versions that change colour by remote control or app, and in both standard and waterproof versions. That makes them perfect for creative projects at home and at work. Here are four ideas to inspire you, followed by some practical tips for getting a professional result.

1. Light up your garden

LED strips can give a garden, terrace or roof a completely different character after dark. Run them under the edge of a bench, along steps, beneath a pergola beam, around raised planters or under the coping of a pool surround for a soft, floating effect. Wrapped around a tree trunk or tucked behind a garden wall, they create a gentle glow without visible fittings.

Outdoors, always choose waterproof strips with a suitable IP rating and use outdoor-rated connectors, drivers and enclosures. Mounting strips inside an aluminium profile with a diffuser protects them and gives a cleaner line of light. For more ideas, see our guide to outdoor lighting basics.

2. Make your business sign stand out

LED strips are widely used to illuminate business signs and logos, either behind lettering for a halo effect, inside light boxes or along the edges of a fascia. A well-lit sign makes your premises easier to find and more eye-catching to people passing by in the evening.

Choose the colour temperature to suit your brand and setting. Warm white (around 3000K) gives a softer, more traditional look; neutral white (around 4000K) is clean and balanced; cool white (around 6000K) is crisp and bright-looking. Colour temperature changes the look of the light, while brightness depends on the lumen output of the strip, so check both. RGB strips allow coloured signage that can match brand colours or change for special occasions.

Signs are often exposed to sun, wind and salt air, so use waterproof strips, quality drivers and protective profiles. For larger projects, consider professional installation to ensure the result is even, with no visible dots or dark patches.

3. Create a feature home bar

LED strips are a popular way to add atmosphere indoors, from bedrooms to kitchens. One of the most striking uses is a home bar. Strips fitted under the counter edge, along glass shelves or behind bottles light the display from below or behind, making glassware and bottles glow.

The same idea works for kitchen cabinets, display cabinets, bookshelves and behind a TV or headboard. Warm white suits relaxed spaces, while RGB strips let you change the mood for a party.

4. Decorate an aquarium

Waterproof LED strips can add accent lighting around an aquarium, for example along the top of the cabinet, behind the tank or around a stand, to create a beautiful focal point in a room.

A few cautions apply. Water resistance is not the same as being suitable for submersion. Strips rated IP65 or IP67 resist splashes, rain and temporary immersion, but they are not designed for continuous use under water, and prolonged exposure can damage the circuit board. Only products specifically rated and designed for submersion, typically IP68, should ever be placed underwater. Keep all drivers and connections well away from water, and use a residual current device (RCD) on the circuit.

If the aquarium contains live plants or corals, they may need a specialist aquarium light with a suitable spectrum. Decorative strips work best as accent lighting rather than the tank’s main light.

Tips for a professional finish

Choose the right IP rating

  • IP20: indoor dry areas only, such as shelves, coves and cabinets
  • IP65: protected against water jets; suitable for kitchens, bathrooms away from direct spray and sheltered outdoor areas
  • IP67: protected against temporary immersion; suitable for exposed outdoor locations
  • IP68: designed for continuous submersion under specified conditions

Use the correct driver

Most LED strips run on low voltage, typically 12V or 24V, and need a driver (power supply) to convert mains electricity. Match the driver voltage to the strip, and choose one rated comfortably above the total wattage of the strip, often by around 20%. For more detail, read our guide to choosing LED drivers.

Mount strips in aluminium profiles

Aluminium profiles help dissipate heat, extending the life of the strip, and a diffuser cover turns individual dots of light into a smooth line. Profiles are also the neatest way to fit strips into gypsum soffits, coves and furniture.

Plan the details

Measure carefully, cut only at the marked cutting points and plan where cables and drivers will go before you start. On long runs, feeding power from both ends or the middle helps avoid voltage drop, which shows as dimming towards the end of the strip.

Find the right strips for your project

The LTC LED Lighting showroom on St Paul Street, Naxxar, supplies LED strip lights in white and colour options, both standard and waterproof, together with drivers and aluminium profiles. Our team can help you choose the right combination. Contact us for advice on your next project.

About Us

RG Alternatives has supplied, designed and installed LED lighting across Malta since 2011 — from factories, hangars and airports to showrooms, shops and homes. Visit our showroom, LTC LED Lighting, in Naxxar.